Tape
Our patent pending carbon fiber tape makes for a really clean trim. Over-spray is easily removed without the potential of scratching your vehicle.

Mask
During the process, the entire truck is masked ensuring that over-spray does not reach surfaces you don't want sprayed.

Sand
All corners and edges of your vehicle are sanded to ensure superior adhesion.

Power Sand
A step often left out by other companies; power sanding. The paint only needs to be scuffed to eliminate any doubt that our product is going to stay on... as long as you own your truck.

Clean
A strong adhesion begins with a clean truck. Special cleaners are used to make sure there is a permanent bond between bed and liner.

Spray
Finally, the product is applied. A proper spray job is 75% prep and 25% spraying. And since it only takes 1.5 hours, you get customers in and out fast.

Remove Masking
The last step to a finished product. The carbon fiber tape is pulled through the liner leaving perfectly straight lines with no risk of damage to the truck.

The Finished Product
The job is done and your truck has a brand new liner that will protect your bed for as long as you own your truck.